- TECH DATA
- PRODUCT REVIEWS
- Product Q & A
Mattei 15 HP Rotary Vane Air Compressor 67 CFM @ 125 PSI, 80 Gallon Air Tank 3-Phase | ERC 511L TM
Available in 200,230,460,575v/3Ph/60Hz (5 HP, 7.5 HP also in 230v/1Ph/60Hz)
ERC SERIES STANDARD FEATURES:
STANDARD EFFICIENCY MOTOR
ERC models are equipped with open-drip proof (ODP) electric motors as standard. TEFC is optional.
Full voltage motor starter (to 40 HP), wye delta starter (50 HP – 100 HP).
Air cooled aftercooler with 18°F approach temperature, moisture separator with automatic drain valve.
Maintenance operations only include changing the oil at predetermined intervals, cleaning or replacing the air filter and cleaning the radiator. Benefit from half the oil volume of rotary screw types, and oil separating filters that can reach 10,000 working hours, for significant savings over the life of the machine.
These compressors are designed for industrial use 24 hours a day and 12 months a year at constant pressure. Mattei compressors' running often exceeds 100,000 working hours, as evidenced by our Revolutionary 10 Year Warranty.
ERC Series compressors are open-frame machines that operate at a constant 1,800 rpm and deliver sound levels as low as 64 dB (A) WITHOUT a sound enclosure – try that with a rotary screw compressor.
Much like the connecting rods on your engines crankshaft, the heart of the Mattei rotor stator unit (RSU) is the rotor which is simply supported by two (2) white metal Babbitt bushings that routinely deliver >100,000 hours of life. Screw type compressors use up to six (6) radial and thrust bearings engineered for only 50,000 hours (ASME B-10) of life.
CAPACITY CONTROLS ADAPT TO YOUR DEMANDS
The layout and design of every air system is different. Thus, Mattei provides a variety of control schemes as standard to better adapt to the demands and dynamics of your system, to save energy and prevent short-cycling and ambient oil misting problems created by inflexible control schemes and underutilized compressors.
MODULATION OPERATING MODE AT CONSTANT PRESSURE
Thanks to a modulating proportional intake valve that supplies air at constant pressure, these compressors can even work without air receivers. This method automatically adapts to system demands and is ideal for applications with little storage or continuous high air demands.
AUTOMATIC ON LOAD / OFF LOAD
Load/Off Load maintains line pressure within a minimum/maximum pressure range, and the compressor may stop and restart according to air demand. Ideal for applications with adequate air storage tanks or large variations in air demand.
COMBINED ON/OFF LOAD AND MODULATION REGULATION
This regulation allows Mattei compressors to modulate within a set pressure range (for example, ± 4-5 psi). Should the air demand decrease, the compressor will off-load and stop, with evident energy savings. Ideal for applications with little storage and large variations in demand.
The air is drawn in by means of a filter and passes through a modulating proportional valve that regulates the air delivery according to the demand. This valve automatically maintains the working pressure at constant levels.
Therefore, the air enters the compression chambers or vanes that the stator, the rotor, the vanes and the covers have formed. This rotor is installed eccentrically to the stator and is equipped with longitudinal grooves in which the blades slide. It is the centrifugal force that pushes the blades against the stator's wall.
An efficient oil injection system guarantees a perfect holding among the moving parts, cooling and lubrication. An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades.
Air compression is triggered by the volume reduction of the vanes in the stator during rotation. By passing through mechanical and coalescing separation stages, the mixture of compressed air and oil is purified until the maximum oil carry-over in the air does not exceed 3 ppm (parts per million).
Finally the air is cooled in the radiator and the condensate is eliminated by a condensate drain.
Drawings & Manuals
Product Q & A