Altec AIR HBS-0150-1-3L, 150 SCFM Single Tower Heated Desiccant Air Dryer
1" NPT, 120/1/60, 200 PSI, with 3-way bypass and outdoor low ambient kit (-20°F). View other configurations.
Overview
Features
- 150 SCFM capacity
- 200 PSI max inlet pressure
- Packaged filters:
- Oil removal to 99.9% at 0.3 to 0.6 microns
- Particle removal to 99.9% at 1 micron
- -50°F outlet dew point
- 120/1/60 voltage
- 3-way electric ball valves
- Low watt density heater
- Industrial duty blower
Description
The Altec AIR HBS-0150-1-3L, 150 SCFM Single Tower Heated Desiccant Air Dryer is more cost effective than the alternative refrigerated air dryer while still providing higher quality air. All HBS Series dryers are provided with factory installed pre and after-filters.
The HBS Series drying process takes the compressed air and flows it upward through the tower, where water molecules adhere to the porous surface of the desiccant. This results in dew points as low as -50°F. The built-in blower then directs a steady stream of low pressure air through the heater and then down through the tower. The heated air desorbs the accumulated moisture from the desiccant material, with the resulting purge air escaping to the atmosphere through the exhaust muffler. The system is then cooled and re-pressurized, ready for the next cycle.
Need Help? Call an expert at 1-866-778-6572
We're open 8:00 am to 5:00 pm ET