Nano Purification 106 SCFM Heatless Modular Desiccant Air Dryer D2 Series | NDL 110

Model:
NDL 110
+ -
$6,707.00
Ships Factory Direct

Rating:
100% of 100
  • DESCRIPTION
  • TECH DATA
  • PRODUCT REVIEWS
  • Documents
  • Product Q & A

DESCRIPTION

nano dryers – D1 & D2 in detail

Patented combined filter & desiccant cartridges

  • Built in inlet water separator (D1 only) eliminates the cost and pressure drop of installing a separate inlet filter in small oil-free compressor applications*
  • Desiccant and outlet filtration are integrated into a single cartridge (eliminates the cost and pressure drop of installing separate filters)
  • High density filled desiccant provides maximum adsorption capacity
  • Easy to replace cartridges simplify maintenance requirements

PLC controlled operation

  • The dryer is operated by a robust and reliable PLC control system offering valuable features including ‘power on’, ‘hours run’ and ‘service required’ indicators
  • Memory retention built into the PLC enables the controller to pick up where it left off in the drying cycle, ensuring consistently clean and dry air downstream
  • Compressor synchronization is a standard energy saving feature which starts and stops the dryer with a signal from the compressor or point-of-use equipment to eliminate purge loss when drying is not required

 Energy saving dew point control option

  • With this option, a dew point sensor is incorporated into the dryer providing the ultimate in energy savings
  • The outlet dew point is constantly monitored allowing the cycle time to be adjusted depending on the actual moisture load - saving valuable purge air
  • Dew point is conveniently displayed on the PLC
  • The -ES option reduces valve actuation increasing service life and includes an extended 5-year valve warranty

Floor or wall installation

  • Can be floor or wall mounted - simply by rotating the feet 90°

Optimum dew point performance

  • Dryers are provided as standard set for a -40°F dew point. Optional dew points from -4°F to -94°F are available
  • Air velocity and, therefore, air to desiccant contact time, is carefully controlled via a pressure maintaining device to ensure optimum dew point performance

Constant flow and pressure

  • Pressure is equalized before switching columns to ensure uninterrupted compressed air and consistent air pressure. Equalization also ensures long desiccant life due to minimized desiccant attrition

 Reliable high performance valves

  • The NDL 010 to 050 use ball valves and two pilot operated solenoid valves for proven performance and reliability
  • The NDL 060 to 090 use four pilot operated solenoid valves
  • The NDL 100 to 130 use two integrated coaxial flow valves for inlet air and two pilot operated solenoid valves for exhaust

Maximum corrosion protection

  • High tensile aluminum columns are alocromed then externally powder coated to provide maximum protection for corrosive environments 

 

 

 

TECH DATA

  • Product Specification

    • CFM (Capacity)
      106 SCFM @ 100 PSI
    • Pressure Rating
      58 to 232 Min/Max PSI
    • Rated Flow
      50 to 100 Degrees F (Recommended Operating Temperature Range)
  • Connection

    • Connection NPT
      1" NPT
  • Dimensions & Weight

    • Dimensions (L)(W)(H)
      49 x 17 x 13
    • Weight (lbs)
      172.0000
  • Power Requirements

    • Standard Voltages
      100/240/1/60

PRODUCT REVIEWS

Overall Rating
100%
3  Reviews

Customer Reviews By Star Rating

  • 100%
    5 Star (3 Reviews)
  • 80%
    4 Star (0 Review)
  • 60%
    3 Star (0 Review)
  • 40%
    2 Star (0 Review)
  • 20%
    1 Star (0 Review)

Overall Product Rating

  • Quality
    5
    100%
  • Warranty
    5
    100%
  • Price
    5
    100%
  • Customer Service
    5
    100%
Write Your Own Review
Overall Rating
0
How do you rate this product?

Drawings & Manuals

Product Q & A

Loading...

Sort By: 

Ask Question


All questions will be displayed after moderation.

No questions yet. Be the first to ask the question!
why-onlinewhy-online