Automatic & No Waste Drains
Extras
Monitoring Equipment
Replacement Desiccant
Air Piping & Kits
Condensate Management
Tank Accessories

BEKO Technologies RA CT 300, 300 SCFM, 230 V, Cycling Refrigerated Air Dryer

2" NPT, 230/1/60, 1.64 kW. View other configurations.

Tara Samuel headshot

Tara Samuel

Order Management Specialist - 10 years at Compressor World

Our experts are highly rated and specialize in a variety of compressed air applications; industrial, food & beverage, medical, lab, and remediation.

Need Help?

Connect one-on-one with an online expert.
Mon - Fri / 8:00 AM - 5:00 PM EST

Features

  • 300 SCFM capacity
  • 2" NPT connection
  • 230/1/60 voltage
  • 1.64 kW power consumption
  • 1 micron required pre-filtration
  • .01 micron recommended post-filtration
  • Pressure rating: 200 PSIG
  • 160°F maximum inlet air temperature
  • 34 to 120°F ambient temperature range
  • Outlet pressure dew point: Class 4-5 outlet PDP in accordance with ISO 8573-1:2010
  • UL/CSA certified
View Other Configurations

The BEKO Technologies DRYPOINT RA CT 300 Refrigerated Air Dryer applies an all aluminum heat exchanger to minimize pressure drop and self-clean using gravitational force. Higher capacity models include voltage options to best fit the installed system.

Warm, humid compressed air is precooled in the air/air heat exchanger when entering the refrigeration dryer. The unit's controller monitors the incoming conditions and adjusts the compressor and condenser fan speed to the required cooling capacity of the refrigerant system. This saves energy, and reduces operating costs over the life of the dryer. The high efficiency condensate separator in the heat exchanger module sustains a high droplet separation of 99%. Condensate is discharged via the standard, level-controlled BEKOMAT condensate drain. Before leaving the dryer, the dried and cold compressed air is reheated in the air-to-air heat exchanger. The relative air humidity is reduced and the cooling capacity is recovered by up to 60%.