40 HP Rotary Screw Air Compressor System with Air Dryer & 240 Gallon Air Tank, Extended Warranty 230/460-Volt, 3-Phase | E40SYS

Model:
E40SYS
+ -
$17,188.00
Ships Factory Direct
Rating:
100% of 100
  • DESCRIPTION
  • TECH DATA
  • PRODUCT REVIEWS
  • VIDEOS
  • Documents
  • Product Q & A

DESCRIPTION

The E-Series features state of the art technology, an asymmetric rotary screw profile, and oil injection power.  The design of this system ensures the highest performance during the compression stage, thus reducing energy consumption levels to a minimum.  The result is an excellent ratio between the actual installed power and the effective air yield, which permits considerable energy and cost savings.
 
Load/No Load Controls with timed shutdown offers one of the most energy efficient control systems on the market. if the compressor doesn’t see a demand within the set time limit (which can be adjusted based on your application), the compressor will completely shut down and restart after the low pressure target has been reached.

Wye Delta Starting, another energy efficient feature, is also standard.  Wye Delta Starting or Reduced Voltage Starting helps reduce the “in rush” current by 1/3 compared to across the line starting.  (The starters and overload devices are manufactured by Siemens)

Our Intelligent PLC offers signals for pressure, temperature, alarms and maintenance indicators.

Concerned about what else you may need for your air compressor system?  Watch Steve describe a complete air compressor system, watch Steve!
 
Compressor
(1) 40 Horsepower (E40) Rotary Screw Air Compressor, base mounted, wye delta reduced voltage starter, TEFC drive motor, PLC control panel with alarms and indicators with sound enclosure.  Standard Factory Warranty
 
Dryer
(1) 200 CFM Refrigerated Air Dryer, 460/3/60, 39 Degree Dewpoint.  Standard Factory Warranty
 
Tank
(1) 240 Gallon Vertical Air Tank rated for 200-PSI, exterior primed, ASME coded.  Standard Factory Warranty
 
Filtration
(1) Particulate & (1) Coalescing Filter with float drains


Description

The E-Series features state of the art technology, an asymmetric rotary screw profile, and oil injection power.  The design of this system ensures the highest performance during the compression stage, thus reducing energy consumption levels to a minimum.  The result is an excellent ratio between the actual installed power and the effective air yield, which permits considerable energy and cost savings.

Load/No Load Controls with timed shutdown offers one of the most energy efficient control systems on the market. if the compressor doesn’t see a demand within the set time limit (which can be adjusted based on your application), the compressor will completely shut down and restart after the low pressure target has been reached.

 

STANDARD FEATURES

  • Air Cooled After Cooler
  • ASME Coded Separator & Safety Valve
  • Belt Driven
  • Compact & Easy to Access
  • Sound Enclosure
  • PLC Controller
  • Maintenance Indicators
  • Alarms (Visual & Audible)
  • Pressure & Temperature Readout
  • Wye Delta Reduced Voltage Starting
  • TEFC Drive Motor
  • Phase Protection
  • 230/3/60 or 460/3/60
  • Load/No Load Controls with Timed Shutdown
  • UL Listed
  • Isolation Valve
  • Removal Cabinet Doors for Easy Maintenance

WYE DELTA STARTING
This technique of starting the motor wired in a Wye connection, and later switching to a Delta Run connection, will dramatically reduce the current demand on a power distribution system. In areas where utility power is limited or over burdened, this system can reduce brown outs and severe voltage drops when a motor is started.
The Wye Start/Delta Run method is not new to the industry. It is used on a limited basis in the US, and more widely used in European countries. Sometimes the method is mandatory on large motors.

  • By using the Wye Start/Delta Run method, customers can achieve lower starting current demand. 
  • This starting method will minimize current demand during starting and reduce the impact on the power system.  
  • This features is standard on all of our Compressor World “E” series machines.

 

 

Air End assembly, Offering low speed operation which means longer life, minimizes vibration, noise, and better performance.

Tappered Roller Bearing, offer high-load resistance, longer operational life.  Estimated 70,000+ hours

 

EXPERT ADVICE. EXPERT SUPPORT.
As a Compressor World customer you will receive the competitive advantage, accumulated experience and the know-how to maintain an efficient compressed air system.

CONSULTATION
Our Compressor World team offers engineering support on all types of compressed air and vacuum systems. You can also go online and find additional information within our “Learning Center” which offers information on installations, maintenance tips and more.


PRODUCTS & SERVICES - a variety of products, numerous warehouses and an extensive inventory for quick shipments. In addition, our service network offers 24/7 hour emergency service and our online sales engine offers real time quotes and support. Compressor World has designed a new, more efficient air compressor sales and service portal – Challenge us!




TECH DATA

  • Product Specification

    • Capacity (CFM) @ 100/125 PSI
      165 CFM @ 125 PSI
    • Compressor Style
      Lubricated Rotary Screw
    • Controls
      Load/No Load Controls with Timed Shutdown
    • Dew Point
      + 39 F
    • Horsepower (HP)
      40 HP
    • Tank Material
      Carbon Steel
  • Overview & Technical Details

    • Air Dryer Style
      200 CFM Refrigerated Air Dryer
    • Certifications
      UL & ASME
    • Electrical Starting
      Wye Delta Starting
    • Power Source/Type
      Electric
  • Additional Features

    • Air Dryer Included
      Included (Shipped Loose)
    • Air Filtration Included
      Included (Particulate & Fine Coalescing Filters)
    • Tank Drain Valve
      Electronic Tank Drain
  • Dimensions & Weight

    • Dimensions (L)(W)(H)
      35.2" x 55.5" x 53.25"
    • Weight (lbs)
      2500.0000
  • Motor Data

    • Motor Type
      TEFC
  • Filtration Grade

    • Filtration Grade
      0.1 Micron
  • Tank Size

    • Air Tank Configuration
      Vertical
    • Air Tank Included
      Included
    • Air Tank Size
      240 Gallon
  • Warranty

    • Standard Warranty
      1 Year Parts & Labor, 5 Year Airend Warranty

PRODUCT REVIEWS

Overall Rating
100%
3  Reviews

Customer Reviews By Star Rating

  • 100%
    5 Star (3 Reviews)
  • 80%
    4 Star (0 Review)
  • 60%
    3 Star (0 Review)
  • 40%
    2 Star (0 Review)
  • 20%
    1 Star (0 Review)

Overall Product Rating

  • Customer Service
    5
    100%
  • Quality
    5
    100%
  • Price
    5
    100%
  • Warranty
    5
    100%
Write Your Own Review
Overall Rating
0
How do you rate this product?

3D VIEWING/VIDEOS

Videos

Drawings & Manuals

Product Q & A

Loading...

Sort By: 

Ask Question


All questions will be displayed after moderation.

Questions: Hi, Does this have VSD ? What type of freon in the dryer?
thanks 1 Answers
why-onlinewhy-online